Which Airbrush Cleaner should I use ?
You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT not use White Spirt or Acrylic Thinners, they are not suitable.
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
2 Pack GLOSS Clearcoat System (2K Urethane)
2 Pack Clear Coat 100ml (Urethane)
Pack Contents :
- 1 x 100ml Clear Coat (High Solid) also known as Urethane or Polyurethane (Supplied in Glass Bottle)
- 1 x 60ml Hardener (Supplied in Glass Bottle)
- 1 x 60ml Thinners (Supplied in Glass Bottle)
100 Parts Clear, 50 Parts Hardener + 10-30% Thinners
(e.g. 50ml Clear, 25ml Hardener + 15ml Thinners).
Drying Times : Air Drying at 20°C, Dust Free 30 Mins, Tack Free : 10-12 Hours, Thoroughly Dry : 48 Hours. Can be polished after 12 hours at 20 °C
ONLY MIX WHAT YOU NEED EACH TIME, once it's mixed it has a life of about 15/20 mins max then it has to be discarded.
Is it possible to pre-mix your 2 pack gloss clearcoat then keep it in a jar for later use if not all used in one go, or is it a case of just mixing enough to do the job?
NO YOU MUST NOT DO THIS, once you mix the clear coat and hardener a chemical reaction is started, similar to epoxy glue or epoxy putty. It will hardened within 15/20 mins, if you mixed the lot you would be wasting product and money, so only mix whet you need each time, you will quickly find the amounts you need with a small amount of practice.
We would recommend starting with 10ml/gram or Clearcoat - 5ml/gram Hardener and 3ml of Thinners and see how much coverage you get wer fin this is plenty to clearcoat a 1:24 model with 3/4 coats.
Is this safe over other paints
Yes, 2K Clearcoat is safe over most other paints (acrylic paint, Tamiya TS) once they are fully dry so please test on scrap first.
but our Airbrush Cleaner is designed for the job and the cheapest
[This stuff is the best!! I have never used as good as this clear coat. You wont use anything else, when you have used this! by Juha Pirilä]
Product ID: 797
People who bought this, also purchased these:
1:20 - 1:24 Weld Lines
1:12 Honda RS250RW Exhaust Pipe (Hasegawa)
1:24 Volk Racing TE37 19" Wheels and Tyres (White)
Professional (Stainless Steel) Scalpel Knife Handle 0933
Professional Scalpel Blades No.10a - 5 Pack
Professional Scalpel Blades No.15T - 5 Pack
1:24/1:20 Nuts, Bolts, Washers, and Fasteners Photoetched Set #8117
Fine Drill Pin Vice (0.1-1.0mm) - 74051
40mm Masking Tape - 87063
Grey Model Filler / Putty (Fine) 180g
Brazilian Flag Coloured Paints 3x30ml
1:24 ENDLESS Brake Systems 2 (4 Piston Caliper And 332mm Disc)
1:24 CSD Ultimate Brake System (PE and Resin)
1:24 Novitec Rosso Wheels for Ferrari F12 ( Type NF3)
1:24 Novitec Rosso Wheels for Ferrari F12 ( Type NF4)
1:24 20" Forgiato Maglia-ECL Wheels (resin) (for LB Works Lambo Huracan )
1:24 OZ WRC Wheels and Tyres
1:24 18" Rotiform Forged CCV Wheels (Resin)
1:24 Wandering Singer Resin Figure
1:24 14" Techno Phantom Wheels and Tyres