Which Airbrush Cleaner should I use ?
You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT not use White Spirt or Acrylic Thinners, they are not suitable.
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
Airbrushing White Primer/Micro Filler 250ml
Airbrushing White Primer/Micro Filler 250ml (8 fl oz)
- Pre-Thinned for Airbrushing
- Excellent Sealing Power
- Good Filling Properties
- Fast Drying
- Easy to Sand
Shake or Stir for about 2 mins ensuring contents is completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Zero Cellulose Thinners
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C
Pleae Note : A few customers have found when masking the model, and when removing the masking tape the primer peels off
To ensure this does not happen please read the following to ensure you correctly apply the product
he Issues are due to the Primer and Thinners in the jar Not being mixed correctly before before applying to the model
If the primer content, which is thick and heavy sinks to the bottom on the jar, therefore if not stirred up fully, all you will be applying is basically Grey Thinners and NOT enough primer which should bite into the plastic and not peeling off
Product ID: 4681
People who bought this, also purchased these:
1:20 - 1:24 Weld Lines
1:12 Honda RS250RW Exhaust Pipe (Hasegawa)
1:12 Weld Lines
Professional (Stainless Steel) Scalpel Knife Handle 0933
6mm Masking Tape c/w Dispenser - 87030
18mm Masking Tape c/w Dispenser - 87032
40mm Masking Tape - 87063
Grey Model Filler / Putty (Fine) 180g
30 off Paint Stirrers
Alclad Grey Primer 120ml - ALC302
The Living Daylights - Aston Martin Cumberland Grey 60ml
1:24 LB-Work Lamborghini Huracan Transkit - Pre-order
Nassau Blue Paint - 1965 Chevrolet Corvette 60ml (Revell Kit)
1:24 Mitsubishi Lancer Evolution V 1998 "Rally Argentina Winner"
1:24 Subaru Legacy Touring Wagon GT-B E-Tune II Version B
1:24 Mitsubishi Lancer Evolution IX GSR
1:24 Nissan Skyline GT-R R32 V-Spec II (BNR32)
1:24 Toyota Celica 1600 GT (1972 Nippon Grand Prix)
1:24 Toyota Celica 1600 GT (TA22-MQ)
1:24 Nissan Skyline GT-R R33 V-Spec