Which Airbrush Cleaner should I use ?
You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT not use White Spirt or Acrylic Thinners, they are not suitable.
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
Clearcoat Lacquer 100ml - Pre-thinned ready for Airbrushing
100ml of 1K High Quality Pre-thinned Clearcoat Lacquer supplied in a glass bottle.
Instructions for use :
Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each), if required you can build up multiple layer to suit your required level of gloss/shine
Air Drying Times at 20ºC,
Dust Dry : 30-40 mins
Touch Dry : 4 Hrs
Full Hardness : 24 Hours,
Thoroughly Dry : 48 Hours. Can be polished after 48 hours at 20ºC
**Do not use over waterbased colour coats
Shelf Life : at least 2 years if stored in tightly closed original containers at cool temperatures.
Decals : So far we have found that the pre-thinned clearcoat is safe over all major brands of Decals like, Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc. but please test on cheaper inkjet printed decals first
Always apply light mist coats over decals NEVER go straight on with wet coats, this could melt the decals
Product ID: 3667
People who bought this, also purchased these:
1:20 - 1:24 Weld Lines
1:12 Honda RS250RW Exhaust Pipe (Hasegawa)
1:12 Weld Lines
Professional (Stainless Steel) Scalpel Knife Handle 0933
Professional Scalpel Blades No.10 - 5 Pack
Professional Scalpel Blades No.10a - 5 Pack
Professional Scalpel Blades No.15T - 5 Pack
1:24/1:20 Nuts, Bolts, Washers, and Fasteners Photoetched Set #8117
Decal Scissors - 74031
6mm Masking Tape c/w Dispenser - 87030
1:24 LB-Work Lamborghini Huracan Transkit - Pre-order
Nassau Blue Paint - 1965 Chevrolet Corvette 60ml (Revell Kit)
1:24 Mitsubishi Lancer Evolution V 1998 "Rally Argentina Winner"
1:24 Subaru Legacy Touring Wagon GT-B E-Tune II Version B
1:24 Mitsubishi Lancer Evolution IX GSR
1:24 Nissan Skyline GT-R R32 V-Spec II (BNR32)
1:24 Toyota Celica 1600 GT (1972 Nippon Grand Prix)
1:24 Toyota Celica 1600 GT (TA22-MQ)
1:24 Nissan Skyline GT-R R33 V-Spec
1:24 Fiat Abarth 695 Ferrari Tributo