Which Airbrush Cleaner should I use ?
You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT not use White Spirt or Acrylic Thinners, they are not suitable.
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
Clearcoat Lacquer 500ml - Pre-thinned ready for Airbrushing
500ml of 1K High Quality Pre-thinned Clearcoat Lacquer supplied in a glass bottle. (Pre-thinned ready for Airbrush.)
Instructions for use :
Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each), if required you can build up multiple layer to suit your required level of gloss/shine
Air Drying Times at 20ºC,
Dust Dry : 30-40 mins
Touch Dry : 4 Hrs
Full Hardness : 24 Hours,
Thoroughly Dry : 48 Hours. Can be polished after 48 hours at 20ºC
**Do not use over waterbased colour coats
Shelf Life : at least 2 years if stored in tightly closed original containers at cool temperatures.
Decals : So far we have found that the pre-thinned clearcoat is safe over all major brands of Decals like, Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc. but please test on cheaper inkjet printed decals first
Always apply light mist coats over decals NEVER go straight on with wet coats, this could melt the decals
Product ID: 4348
People who bought this, also purchased these:
1:12 Honda RS250RW Exhaust Pipe (Hasegawa)
40mm Masking Tape - 87063
Grey Model Filler / Putty (Fine) 180g
Plastic Weld (Glue)
Spray-Work Painting Stand Set - 74522
Micro Kristal Klear (Crystal Clear)
Micromesh Polishing Craft Kit
Plastic Cement (Glue) 40cc - 87003
Basecoat Thinners 250ml
2 Pack GLOSS Clearcoat System (2K Urethane)
Brazilian Flag Coloured Paints 3x30ml
1:24 ENDLESS Brake Systems 2 (4 Piston Caliper And 332mm Disc)
1:24 CSD Ultimate Brake System (PE and Resin)
1:24 Novitec Rosso Wheels for Ferrari F12 ( Type NF3)
1:24 Novitec Rosso Wheels for Ferrari F12 ( Type NF4)
1:24 20" Forgiato Maglia-ECL Wheels (resin) (for LB Works Lambo Huracan )
1:24 OZ WRC Wheels and Tyres
1:24 18" Rotiform Forged CCV Wheels (Resin)
1:24 Wandering Singer Resin Figure
1:24 14" Techno Phantom Wheels and Tyres