Falcon Scale Models - 1/12 Electrical wiring connectors, Wires & Shrink Tube - 50pcs

Falcon Scale Models - 1/12 Electrical wiring connectors, Wires & Shrink Tube - 50pcs

Set of 50 electrical wiring connector which will raise level of detail of your model on the next level.

Type C connector can be used to connect 2 wires as well as part of connector with smaller diameter can be glued into previously drilled hope and then the connector can be used as cable joint for example oxygen sensor or other ECU connections.

If needed colour isolation from wires can be removed and then one can use thin wires (which can be painted) for reproduction of multi wire connections. Holes in each connector (their size and location) can be easily changed with the use of putty and drills.

Kit contains:

• 10 connectors of A type – 2 holes on each side (dim. 1 x 1.7 x 3 mm)
• 10 connectors of B type – 4 holes on each side (dim. 1.7 x 1.7 x 3mm)
• 20 connectors of C type – 1 hole on each side (dim. 0.7 x 3mm)
• 10 connectors of D type – 4 holes on one side / 2 on the other (the same as B type)
• Set of wires in 8 colors (approx. 20 cm each, external diam. 0.6 mm, wire diam. 0.25 mm)
• Set of 2 shrink tubes, each in different size (approx. 10 cm long each)