Basic Zero Paints F.A.Q.
All Zero Paints dry matt and require clear coating unless otherwise specifiedApplication Notes : Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
Fisheye Eliminator - Anti-Silicone Additive - 30ml
1 off : 30ml /1 fl oz Bottle of Fisheye Eliminator / Anti-Silicone Additive for 2K Clearcoats urethanes to improve levelling and eliminate fisheyes and crater formation.
Produces perfect finish in extremely difficult application conditions.Improves levelling and eliminates silicone disruptions to paint surface.
For best results, mix 15ml per litre/ quart of lacquer or topcoat, add hardener and thinners where required, mix thoroughly and leave to condition for 10 minutes
Do not exceed recommended levels of addition. Do not use in primer systems
Common Causes of Fish eyes :
- Oil, wax, grease or silicone contamination.
- Polishes, aerosol spray that contain silicone (some interior cleaners).
- Contamination by overspray of an incompatible paint system
- Contaminated air lines.