Basic Zero Paints F.A.Q.
All Zero Paints dry matt and require clear coating unless otherwise specifiedApplication Notes : Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
Light Grey Primer 120ml Airbrush Ready - New and Improved
Light Grey Primer 120ml Airbrush Ready - New and Improvedsupplied in Glass Bottle
- Improved adhesion to Plastic Parts
- Smooth Finish
- Supplied in Glass Jars for long shelf life
- Light Grey Colour - great under any colour basecoat
- Pre-thinned for Airbrushing
- Excellent Sealing Power
- Fast Drying
- Easy to Sand
- For cleaning of equipment use Zero Paints Airbrush Cleaner
Before applying any Primer : Wash and clean the plastic to remove the mold release agent (all kits have this) ( we recommend using Key and Clean, Rinse the plastic well making sure that the soap/cleaner is completely washed off. The primer will not adhere to the plastic item if there are still any residue left. Leave to dry comletley
Shake or Stir for about 2 mins until the ball bearing rattles freely, ensuring contents is completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi. 2-3 coats are recommended leaving 5 mins between coats.
If you only apply a light mist coat it will not adhere to the plastic
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C