Basic Zero Paints F.A.Q.
All Zero Paints dry matt and require clear coating unless otherwise specifiedApplication Notes : Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use ?
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation.
|Health and Safety Notes :|
|Use in a well ventilated area.
Avoid contact with eyes.
Harmful if swallowed, call a Doctor immediately.
Keep out of reach of children.
Keep away from sources of ignition.
Please download the Material Safety Datasheets here ->
Semi-Gloss (Satin) 2 Pack Clearcoat 100ml (2K Urethane)
Semi-Gloss (Satin) 2 Pack Clearcoat for use on various models requiring a semi-gloss protective finish.
- 100ml Semi-Gloss clearcoat (Medium Solid) also known as Urethane or Polyurethane
- 25ml Hardener
- 60ml Thinners
All products are supplied in glass bottles/boxed
Mixing Ratio :
100 Parts Clear + 25 Parts Hardener + 30 Parts Thinner.
(e.g. 50ml Clear, 12.5ml Clear + 15ml Thinners)
Drying Times : Air Drying at 20°C, Dust Free 30 Mins, Tack Free : 10-12 Hours, Thoroughly Dry : 24 Hours.
Is it possible to pre-mix your 2 pack gloss clearcoat then keep it in a jar for later use if not all used in one go, or is it a case of just mixing enough to do the job?
No must not do this, once you mix the clear coat and hardener a chemical reaction is started, similar to epoxy glue or epoxy putty. It will hardened within 15/20 mins, if you mixed the lot you would be wasting product and money, so only mix whet you need each time, you will quickly find the amounts you need with a small amount of practice.
We would recommend starting with 10ml/gram or Clearcoat - 5ml/gram Hardener and 3ml of Thinners and see how much coverage you get.
Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc.
Please remember to apply a few mist coats over the decals before the wet coats