Colle 21 Cyanoacrylate Gel Glue (20g)

Colle 21 Cyanoacrylate Gel Glue (20g)

Initial drying : 10 to 90 seconds.
Complete drying: 24 hours.

does not run off vertical surfaces

 is not absorbed by porous surfaces

thixotropic properties and high viscosity.

Colle 21 Gel is ideal for bonding leather :

metal

rubber

wood

ceramic

cement

hard plastic

glass

leather

plywood
EXCEPT PE, PP and PTFE (Teflon)

Shear strength : 3.5 MPa.
Fills irregularities up to 0.25 mm
Resistant to temperatures from -55°C to 80°C.
Density: 1.1 g/cm³.

Instructions for use : The surfaces to be bonded must be clean, free of grease and dirt (for this purpose you can use the degreasers P-102 or P-959). Apply a thin, even layer of adhesive to a surface. The thinner the layer, the stronger the connection. Immediately assemble the parts, press and hold for a few seconds.