Sparmax ARISM Compressor
Part No: ARISM
A new generation of compressors with more power in smaller units.
The Sparmax ARISM compressor embodies the philosophy of Sparmax: raising performance and rising above expectations through continuous improvement and unwavering quality. Reliable and functionally versatile, this innovative model exceeds the performance of similar sized compressors.
With a sleek and modern design, the Sparmax ARISM compressor is aimed at airbrush enthusiasts and artists looking for a compact, yet powerful, light-weight compressor for airbrushing.
The compressor automatically turns on when you press your airbrush trigger, providing instant air, and turns the compressor off again when the airbrush is not in use.
The Sparmax ARISM compressor features:
Low maintenance, oil-less single piston air compressor
Working pressure from 0 psi to 35 psi
Auto on/off switch: 1.7/2.4 bar (25/35psi)
Airbrush bleed valve
Silver Bullet moisture trap
2M Braided hose
Detachable power cord & plug
Air flow: 13 - 15 lpm (0.46 - 0.53 cfm) at open flow
1/8 BSP outlet on compressor
Size: L19.2 x W12 x H18.5 cm (6.7" x 4.7" x 7.6")
Weight: 2.6 kgs (5.7 lbs)
Voltage: 220-240V 50Hz
Noise level: 49±dB
Duty cycle: 40 minutes continuous use. After 40 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on.
The Sparmax ARISM compressor is suitable for these airbrushes and similar airbrushes, which have low air consumption:
Sparmax SP35 / SP35C
Sparmax MAX-3 / MAX-4
Iwata Custom Micron (with the air bleed valve open as the Micron has lower air consumption)
Iwata Kustom series (except K-TH)
Iwata HP-B, HP-B-Plus, HP-BH Hi-Line
Iwata HP-C, HP-C-Plus or HP-CH
Iwata Eclipse BS
Iwata Eclipse CS
Iwata Eclipse BCS
Iwata Revolution BR, M1
Iwata Revolution CR, M2
Iwata Revolution SAR, BCR
Neo for Iwata CN and BCN (with the air bleed valve open as the Neo has lower air consumption)
Premi Air G35