Clearcoat Lacquer 60ml - Pre-thinned ready for Airbrushing

60ml of 1K High Quality Pre-thinned Clearcoat Lacquer .

Instructions for use :
Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each), if required you can build up multiple layer to suit your required level of gloss/shine

Air Drying Times at 20ºC,
Dust Dry : 30-40 mins
Touch Dry : 4 Hrs
Full Hardness : 24 Hours,
Thoroughly Dry : 48 Hours. Can be polished after 48 hours at 20ºC
**Do not use over waterbased colour coats

Shelf Life : at least 2 years if stored in tightly closed original containers at cool temperatures.

Decals : So far we have found that the pre-thinned clearcoat is safe over all major brands of Decals like, Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc. but please test on cheaper inkjet printed decals first

Always apply light mist coats over decals NEVER go straight on with wet coats, this could melt the decals