Colle 21 Pro Evolution 2.1. Ultimate kit
Brand: Colle 21
Part No: Colle21-0042
HS Code: 35061000
Origin Country: Italy
Colle21 Pro Evolution 2.1. Ultimate kit contains:-
1x Glue 21 Super Glue (21gr).
1x Glue 21 Cyano black.
1x Slow Dry Ammo Mig Colle21 Anaerobic.
1x Activator21 Spray (200 ml) – accelerates the gluing of Colle21.
1 x Magicdust21 (30gr bottle) to plug holes.
5 x abrasive files: (240gr / 180gr / 150gr / 120gr / 100gr).
1 x Activator 21 liquid.
1 x cement AMMO MIG 21.1
1 x Colle blanche Colle 21
1 x Debonder 21
1 x White glue AMMO MIG 21 for wood and plexis, 1 x Primer for PP-PE-PTFE plastics, Nozzle.
1 x Display Colle21
1x Stylo Colle21
COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to position correctly your assemblies. Assembly without pressure of 2 surfaces. The pressure made (15 to 45 seconds) will guarantee a strong and precise sticking.
COLLE 21 does not dry after opening and you can use it until the last drop.
Ideal for gluing Leather, Rubber, ceramics, wood, iron, metal and plastics (except for PE, PP, PTFE)
Resistant to water, shock and vibration.
Fast setting after pressure from 10 to 15 seconds.
Colle 21 should be kept at room temperature
- Protect yourself against possible splashing fluid.
- Apply a few drops of glue to only one of the 2 pieces. Apply pressure for 15 sec.
- WARNING Cyanoacrylate : Cause irritation to the respiration system, eyes, skin. Don’t breathe vapors. In case of contact with eyes, rinse carefully for several minutes, consult a Doctor.
- In case of contact with skin, wash with warm water and soap. KEEP OUT OF REACH OF CHILDREN. Do not use near liquid or food. Product : Ethyl-2 cyanoacrylate 80-90%.
Ideal for filling a hole, reinforcing of 2 pieces to be assembled.
Apply 1 drop of colle 21. Pour the magicdust 21 on the point of sticking. Repeat if necessary.
Once completed, you can sand and paint the assembly.
For use caution :
Do not breathe, do not swallow. Toxic product. Keep out of reach of children.
Colle21 is a multi-purpose, anaerobic Super Glue, Cyanoacrylate.
Colle21 Ultra-adhesive and extremely resistant glue: glue cyanoacrylate glues in just 10/15 seconds with a continuous pressure of 2 pieces.Super Glue Colle21 with cyanoacrylate and modeling and bricolage is resistant to a temperature of about 150 ° C.
Colle21 (cyanoacrylate glue) has a resistance of 180 kg / cm2.
Thanks to the precision straw included in the bottle, Colle21 (cyanoacrylate glue) is easy to use and is applied precisely without wasting even a drop.
Colle21 (cyanoacrylate glue) can be used in DIY, modeling, repair and nail reconstruction.
Super Glue Colle 21 is ideal for bonding leather, wood, ceramic, rubber, iron, metal and plastic (excl. PE, PP, PTFE)
Pressure adherence in 10-15 seconds, for this type of plastics and difficult-to-bond materials Prymer21 is recommended.
Glue Cyanoacrylate is resistant to water, shocks and vibrations.
The main advantage of having a cyanoacrylate glue is to make your work even more precise and resistant.
You can easily clean the precision straw by immersing it in the acetone after using it.
Super Glue Colle21 MUST BE STORED AT AMBIENT TEMPERATURE, do not expose it to sunlight and do not store it in the fridge.
Product safety: this item is subject to specific safety warnings and instructions not suitable for children without adult supervision. Warning: contains fragrances that can cause allergies, attention: use with protective devices, look at safety data sheet.
Precision polyethylene straws with 22GA diameter ideal for all the Colle21 Cyanoacrylate Super Glue.
The drinking straws allow precision bonding by dosing the Colle 21 cyanoacrylate glue in small doses.
Precision Straws can be cleaned by dipping them in the acetone 2/3 times to be able to use them several times.
Magicdust21 Glass Powder Filler ideal for model making and DIY to use with Super Glue Cyano Colle21.
Magicdust 21 Glass Powder is perfect for filling holes in cracks, reconstructing any broken or missing pieces and strengthening the adhesion of two surfaces.
The combined use of Super Glue Cyanoacrylato Colle21 and Magicdust21 Glass Powder is ideal for all do-it-yourself applications, model building, restoration and repairs on all types of materials.
Use the 3 Lima21 to prepare the surfaces before gluing.
When to use the Magicdust21 Glass Powder??
When the 2 pieces to be glued do not match.
When our model or object is broken or fragile.
When we lost one of the parts to be glued.
How to use the filler: Apply a drop of Super Glue Colle21 on the surface and then slowly pour the Magicdust21 filler powder onto the crack.
Repeat the operation several times if necessary.
Once the operation is finished, you can smooth the surface worked with Magicdust21 Glass Powderand eventually paint for a nice final touch.
Extra thin Cement Ammo MiG by Colle21,
ideal for modeling and DIY.
30 ml. Quick glue for Polystyrene plastic
Extra Thin Plastic Cement
Hold the pieces together, apply the cement on the joint
and he attracted himself into space by capillary action.
nDry completely in 10 minutes.
PRIMER 21 For Plastics PE, PP, PTFE, Glass, Plessiglass,Polystyloro.
Primer21 base for bonding difficult plastics such as PE, PP, PTFE, glass, plessiglass, polystyloro, to use Primer21 correctly: Apply the product with the supplied brush on both edges to be glued to prepare the surfaces before bonding, wait 30 to 40 seconds for the product to work, it is advisable to repeat the operation 2/3 times .
Now we can proceed with the gluing by applying the Colle21 Super Glue Cyanoacrylate.
Activator21 accelerates the drying and gluing of Super Glue cyanoacrylate Colle21.
The Activator 21 Cyanoacrylate Super Glue, activator can be applied in two different ways:
Before gluing Apply the activator on one of the two objects / pieces you want to glue and wait until the spray then apply Colle21 on the other object / piece, quickly join the two surfaces and wait for the glue to dry.
After bonding: Apply the Super Glue Colle21 on one of the two objects / pieces you want to glue, join the surfaces, then spray the Activator21 on the joint and wait for the glue to dry, doing this will speed up the gluing time ( it is possible to repeat the operation several times to better glue and reinforce the piece in question).
The Activator21 is transparent and leaves no marks on the treated surface, it is not aggressive with paints and does not leave a lot of odors but it is advisable to use it in a ventilated room.
For a homogeneous result use the Activatore21 spray at 30cm from the surface.
Activator for cyanoacrylate Activator 21 can be applied thanks to its nebulizer included in the 200ml can.High strength acrylic ULTRA Glue Ammo Mig by Colle21. Specially designed to fix photo-etched or transparent parts comfortably without leaving any residue whatsoever. This formula is also perfect for all types of cardboard building materials, various types of paper or laser-cut cardboard, and wood. You can also use it when creating dioramas to firmly secure groundwork products. ULTRA-GLUE Ammo Mig by Colle21 can be precisely applied with a brush and can be diluted and cleaned with water. Dries to a completely transparent finish in 24hours.
1 SLOW DRY AMMO MIG COLLE21 ANAEROBIC
Activateur21 liquid for cyanoacrilate Super Glue Colle21 is an activator that makes instant bonding at a very precise point, easy to use with its applicator brush.
It is used in combination with Colle21(cyanoacrilate glue).
It makes it possible to join small parts safely without exerting too much pressure.
The liquid Activator21 for Cyanoacrilate Super Glue also accelerates the sticking of the Cyanoacrylate Colle21 The liquid activator21 can be applied in two different ways:
Before gluing: apply Activator 21liquid for Cyanoacrilate Glueon one of the two objects or pieces you wish to glue and wait until the liquid activator21 is completely evaporated.
Apply the Cyanoacrilate Colle21 to the other object or part, quickly join the two surfaces and wait for the glue makes its (instantaneous).
After gluing: Apply Colle21 Cyanoacrilateto one of the two objects or parts you want to glue, join the surfaces, then apply the Liquid Activator21 for Cyanoacrilate Glue to attach it and wait for the glue to set (2 to 3 seconds)
The Liquid Activator 21 for Cyanoacrylate Glue is transparent and does not leave marks on the treated surface. The application of theliquid activator 21for cyanoacrilate glue is very precise on a desired gluing point and very easy to use with its applicator brush
Colle 21 Black-21gr. Super Glue Black Cyanoacrylate ideal for Modeling and DIY.
COLLE 21 Black Bottle of 21gr Super glue with precision nozzle for the application. Ideal for natural rubber, metal, ceramic, wood, leather, cardboard and plastic (excl. PE, PP, PTFE)
Colle21 is a multi use super glue, anaerobic, cyanoacrylate.
Ultra-adhesive and extremely resistant: the Colle21 Black cyanoacrylate Glue in just 10/15 seconds with a continuous pressure of the 2 pieces.
Colle21 Black cyano is resistant to a temperature of about 150 ° C.
Colle21 Black(black cyanoacrylate glue) has a resistance of 180 kg / cm2.
Thanks to the tip of the nozzle included in the bottle, Colle21 Black(black cyanoacrylate glue) is easy to use and is applied without wasting even a drop.
Colle21 Black (black cyanoacrylate glue) can be used in your DIY, repair or construction work.
Colle 21 Blackis Ideal for use with leather, wood, ceramic, rubber, iron, metal and plastic (excl. PE, PP, PTFE) Pressure bonding in 10-15 seconds.
Colle21 Black is water, shock and vibration resistant.
the main advantage of having a black cyanoacrylate glue is to highlight the gluing point making your work even more precise.
You can easily clean the nozzle with acetone after using it.
Colle21 Black MUST BE MAINTAINED AT 16/17 degrees AMBIENT TEMPERATURE.
Product safety: This article is subject to specific warnings and safety instructions.
Warning: use Colle21 Black under the supervision of an adult Warning: it contains scents that can cause allergies, attention: use with protective equipment.