PDF Download
Basic Zero Paints F.A.Q.All Zero Paints dry matt and require clear coating unless otherwise specifiedApplication Notes : Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ? |
|
Please Note: We can only ship paint to a select list of Countries due to restrictions on the Transportation of Flammable Products. Please click here for a complete list and explanation. |
 |
| Health and Safety Notes : |
| Use in a well ventilated area. Avoid contact with eyes. Harmful if swallowed, call a Doctor immediately. Keep out of reach of children. Keep away from sources of ignition. Please download the Material Safety Datasheets here -> |
Grey Model Filler / Putty (Fine) 180g
Model Filler (Fine) 180g (Yes 180g - 6 times bigger than most model fillers)
Which is a fine grade model filler which can be sanded, filed and painted once dry.
Fills hairline cracks and gaps between plastic parts.
The product can be sanded when fully dry using a fine grade of sandpaper and then painted.
Directly onto substrate without excessive application of product. If gaps are deep, two thin coats are preferable to one thick coat.
Surface dry in 15mins. Sandable in 20mins at 20 degree C. Drying times will vary according to ambient temperature and humidity.
Excess filler should be wiped away with a damp cloth. Product is permanent once dry.
People who bought this, also purchased these:
Latest Products
