Micro Sol Decal Setting Solution

Micro Sol Decal Setting Solution

In Stock

Price: £6.49

Brand: Microscale

Part No: MS-MI02

"Micro Sol setting solution is for the most difficult irregular surfaces you find on models. It completely softens the Decal allowing it to drape down onto the surface of the model conforming perfectly and without distortion.
You can get the most amazing results in seemingly impossible places, because Micro Sol actually makes the decal part of the paint. For that reason you should coat Micro Sol on for only a few seconds and then leave it alone, it does the work.
Do not touch until dry as the decal is very soft at this stage and could be easily damaged.

The Difference Between Micro Sol and Micro Set

Micro Set is used to prepare the surface of the model where you want to place your decal, so you can slide your decal off it's paper and onto the surface where you want it, and reposition it a little until you are happy. Wick off excess fluid using some paper or a sponge or something.

Micro Sol will "melt" the decal into paint - making it soften and snuggle into cracks and ridges etc. Once you have applied the Micro sol over the decal after it has been placed on the model, hands off - do not try to move the decal or wick off excess fluid - the decal will fall apart and be ruined.
Above advise from Stein of Norway